Troubleshooting Guide - Cal Flame Chef C100B Owner's Manual

TROUBLESHOOTING GUIDE

If Grill fails To Operate Properly:
1. Turn off gas at source, turn Control Knobs to the off position and wait five minutes
before trying again.
2. Check gas supply at connections.
3. Repeat lighting procedure and if grill still fails to operate properly, turn off gas at source,
turn the control knobs to the off position and wait for the grill to cool down and check
the following:
Problem: Misalignment of burner tube(s) over orifice(s)
Solution: Reposition the burner tube to properly seat over orifice
Problem: Obstruction In Gas Line:
Solution: Remove fuel line from grill. Do Not smoke or perform any maintenance in
the vicinity of an open flame. Open gas valve for one second to blow out any
debris. Close off gas valve and reconnect fuel line securely.
Problem: Plugged Orifice:
Solution: Remove cooking grills, Flame Tamers and grease tray. Remove Burners from
bottom of firebox by pulling cotter pin from beneath burner peg using a
standard screwdriver or needle nose pliers. Carefully lift each burner up and
away from gas orifice. Remove the orifice from the control valve. Gently clear
any obstruction with a fine wire. Reinstall orifice, reinstall burners over orifices
and seat burner peg into position hole at the bottom ledge of the firebox.
Replace cotter pins. Replace cooking components and grease collectors. If an
obstruction is suspected in the control valve please contact your local Cal
Flame dealer for assistance.
ORIFICE CLEANING LOCATION:
37
Rev 06/01/2003