Manually Lighting The Grill Burners - Cal Flame Chef C100B Owner's Manual

Lighting The Grill Burners
(continued)
7. Repeat the procedure or try "Manual Lighting procedure" below.
8. Upon successful lighting, repeat the process on the other burners you wish to light.
9. To shut off burners rotate knob and turn to OFF. It is normal to hear a popping
sound when the burners are turned off.

Manually Lighting The Grill Burners

1. Open the hood.
2. If you have just attempted to light the burner, allow 5 minutes for any accumulated
gas to dissipate.
3. Slide out the drip tray from the grill.
4. Keep your face as far away from the burners as possible.
5. Using only a long stem match, hold near the burner ports.
6. Push in and turn counter clockwise the grill's gas control knob just past the LIGHT
position to HIGH.
7. Listen for the "Whoosh" sound. If the burner does not light after 5 seconds, turn the
control knobs to the OFF position. Wait 5 minutes until the gas clears before
attempting to light it again.
8. If the burner does not light after several attempts see Troubleshooting Guide in the
back of this manual.
29
Rev 06/01/2003