Access Door - Cal Flame Chef C100B Owner's Manual

INSTALLATION OF YOUR NEW
Installing Access Doors
1. Provide cut out and door jamb with
inside dimensions as follows:
16 1/4" X 19 " for single door
28 1/4" x 19 3/8" for double door
2. Secure the steel frame with 16 screws of
type #10 X fl" truss head phillips S/S.
3. Attach doors to frame.
ACCESS DOORS
15
4. Adjust doors as follows:
a) For height adjustment, loosen the two
screws attached to each mounting plate.
b) Snap off hinge and secure mounting
plate with #6 X 1" flat phillips S/S.
c) For side adjustment turn screw to
increase or decrease door overlay.
d) For depth adjustment, loosen screw,
adjust door to desired position and retighten
screw.
Rev 06/01/2003