Side Burner Installation - Cal Flame Chef C100B Owner's Manual

INSTALLATION OF YOUR NEW
1) Install side burner into an area of
17-1/2 inches long, 11 inches wide
and 3 inches deep.
(See page 8 for size)
2) Assemble a 3/8 pipe nipple to the
3/8 pipe tee using teflon tape or pipe
sealant. Use only sealant that is
approved for use on LP gas.
3) Install the pipe tee assembly to the
grill intake pipe with pipe sealant.
Tighten assembly and align the
branch opening of the tee with the
hole of the cabinet.
4) Connect the flexible hose (male end)
to the pipe tee with pipe sealant.
5) Install and secure the Side Burner
into the island by simply setting in
place.
6) Connect the female end of the
flexible hose to the side burner
intake pipe with pipe sealant.
7) Connect gas supply to the grill
following the instructions on page 9.
8) Check for gas leaks using soap
water solution. (1 part liquid soap, 3
parts water)
SIDE BURNER
13
Rev 06/01/2003