Disconnect Bluetooth Connection - Cleco CellCore CCBA Programming Manual

Icon
3.10.3

Disconnect Bluetooth connection

>
Fig. 3-38: Submenu – Disconnect Bluetooth connection
Button
Apex Tool Group
Description
List of all devices detected during scanning.
• All devices with which a Bluetooth connection is possible are displayed. The tool
can only connect to a controller of the mPro200GC series.
• Each device is displayed with an icon and the MAC address or name of the
device.
• The controller to which the tool is already connected is highlighted in green in the
list.
To establish a Bluetooth connection, select a controller and confirm with the
ton, see document P2402KA for details.
→ Yellow background: Connection establishment is ongoing.
→ Green background: Bluetooth connection has been established.
→ Red background: Bluetooth connection failed.
Waiting time until a device is found during the scanning process.
>
Description
 Press to cancel the process.
→ The Bluetooth connection to the device is not interrupted.
→ The Disconnect Bluetooth connection menu is exited.
 Press to disconnect the Bluetooth connection.
→ The Bluetooth connection to the device is interrupted.
→ The Disconnect Bluetooth connection menu is exited.
P2398PM | 2019-12
3
Menus and Functions
EN
but-
43