Bluetooth Communication - Cleco CellCore CCBA Programming Manual

3.10

Bluetooth communication

>
Fig. 3-35: Menu – Bluetooth communication
Button
MA
Apex Tool Group
Description
Bluetooth is activated.
→ All buttons of the Bluetooth menu turn blue.
Bluetooth is deactivated.
→ All Bluetooth settings are greyed out.
→ " - " is displayed right next to the symbols.
Scanning Bluetooth devices and establishing a Bluetooth connection.
Display active Bluetooth connection and disconnect Bluetooth connection.
→ The MAC address or the name of the controller is displayed with which the tool
is connected via Bluetooth.
Select the node number.
• The IP address ranges from 192.168.245.101 to 192.168.245.107 and depends
on the node number.
Example: Tool 3 has the IP address 192.168.245.103.
• Ensure that each node number is assigned only once.
Up to seven node numbers can be assigned:
1. Press the button to activate the input field.
2. Use the buttons or
3. Confirm with the button.
→ If the node number is assigned twice, the field is highlighted in yellow and the
symbol is displayed in the run screen.
 In this case, change the node number.
MAC address display of the Bluetooth module.
P2398PM | 2019-12
55-C2-02-44-
91-FC
to increase/decrease the node number.
3
Menus and Functions
EN
41