Setting The Date And Time - Cleco CellCore CCBA Programming Manual

3.7.1

Setting the date and time

The date and time can only be changed in the FastApps mode. In the mPro mode, this menu is only used as
a display.
>
Fig. 3-15: Submenu – Setting the date and time
Button
To change the date or time:
1. Select the date or time and press the
2. Enter the hour and minutes or the day, month and year separately.
- Use the
- Use the
3. Confirm with the
→ After the changes have been made, the input is checked. If the input is permissible, the input box is
highlighted in green and the checkmark turns black. If the input is not permissible, the input box is
highlighted in red and must be changed.
4. To save the changes, press
→ After saving, the menu is exited.
To exit the menu without saving the changes, press and hold
Apex Tool Group
>
Description
Display of the currently selected menu: Set date and time
Time display
Presentation:
Hour: Minute
Display of the date
Presentation:
Day.Month.Year
Save time and date
and buttons to increase/decrease the numbers.
and buttons to switch between the input boxes.
button.
.
P2398PM | 2019-12
button.
.
3
Menus and Functions
EN
25