Footer; General Presentation Of The Buttons - Cleco CellCore CCBA Programming Manual

Symbol
Note
When the symbols
tool is connected to the controller. In this case, the parameters for the FastApps mode are used.
3.2.2

Footer

The buttons in the footer are not displayed in every menu.
Button
3.2.3

General presentation of the buttons

Button
Apex Tool Group
Description
FastApps mode is activated.
Undervoltage limit is reached. 3.7.4 Setting the shut-off properties, page 27.
and are displayed, the FastApps mode is selected and, at the same time, the
Description
This button is displayed on the run screen and in counterclockwise rotation.
 must be pressed to change between counterclockwise rotation and runscreen.
Select Linking group/FastApps. This button only applies to the run screen.
 or must be pressed to change between the Linking groups/FastApps
mode.
This button is displayed on the run screen and in counterclockwise rotation.
 must be pressed to go to the main menu.
Arrow down indicates that there are other menu items available that are not yet dis-
played on the LCD. To reach them, press
Description
Button is in color: Function selectable.
Button highlighted in gray: Function disabled.
Button outlined in blue: Function is currently selected with the arrow buttons and can
be opened or activated with the
Button outlined in green: Function is selected and activated.
Button highlighted in blue: Function is selected and activated.
P2398PM | 2019-12
.
button.
3
Menus and Functions
EN
11