Panel Keys; Lcd Icons - Smartgen HGM1790N User Manual

4.3. PANEL KEYS

Key Definition
Stop/Reset
Auto/Increase
Start/Decrease
Page Down

4.4. LCD ICONS

Icon
Genset Start Indication
Boot time is counting (reaching crank
disconnect condition)
Emergency Stop Alarm
Over Speed/Over Frequency Alarm
Under Speed/Under Frequency Alarm
High Temp. Alarm
Low Fuel Level
Auxiliary Alarm
Low Oil Pressure
Fail to Start
Fail to Stop
Voltage Abnormal
Over Voltage
Under Voltage
Over Current With Load
HGM1790N Genset Controller User Manual
Table 3 Key Descriptions
In auto/manual mode, press this button will shutdown the genset;
Reset shutdown alarms when genset in alarm status; Indicator
lights and LCD icons status can be tested when press this button
for over 3s in stop mode; Stop immediately if press this button
during stop process; Quick exist parameter setting menu if press
this button.
Pressing this button will place the module into its auto mode, and
genset is controlled by remote start signals;
In settings menu moves cursor up and increases the set value.
Pressing this button will start genset.
In settings menu moves cursor down and decreases the set value.
Using this button you can scroll pages of the LCD monitor;
Enter settings menu if hold and press over 2s;
Move cursor and confirm setting information in parameter setting
menu.
Table 4 LCD Icons
Definition
Description
Icon
Fuel Level Indication
Generator Voltage Indication
Battery Voltage Indication
Oil Pressure Unit
Current With Load Unit
Hours Count
Frequency Unit
Temperature Unit
Speed Unit (revolutions per minute)
Active Power Unit
Voltage Unit
Percentage
Definition
Page 8 of 31