Maximum Ratings; Ambient Conditions And Classifications - PI P­73 Series User Manual

10 Technical Data
10.1.2

Maximum Ratings

P-73x positioners are designed for the following operating data:
Model
P-733.2CD,
P-733.2CL
P-733.2DD
P-734.2CD,
P-734.2CL
P-733.3CD,
P-733.3CL
P-733.3DD
P-733.ZCD,
P-733.ZCL
1 To ensure stable operation, the maximum operating frequency has been defined as around
one third of the mechanical resonant frequency.
2 The heat that is generated by the piezo actuator during dynamic operation limits the value for
maximum power consumption.
Details can be found at the following website:
https://www.physikinstrumente.com/en/technology/piezo-technology/properties-piezo-
actuators/electrical-operation/
10.1.3

Ambient Conditions and Classifications

Pay attention to the following ambient conditions and classifications for the P-73x:
Area of application
Maximum altitude
Air pressure
Relative humidity
Operating temperature
Storage temperature
Transport temperature
Overvoltage category
Protection class
Degree of pollution
Degree of protection
according to IEC 60529
42 Version: 1.1.0
Maximum operating
voltage
-20 to +120 V
-20 to +120 V
-20 to +120 V
-20 to +120 V
-20 to +120 V
-20 to +120 V
For indoor use only
2000 m
1100 hPa to 700 hPa
Highest relative humidity 80 % for temperatures up to 31 °C
Decreasing linearly to 50 % relative humidity at 40 °C
-20 °C to 80 °C
-20 °C to 80 °C
-25 °C to 85 °C
II
I
1
IP20
PZ103E
Maximum operating
1
frequency (unloaded)
167 Hz (in X and Y)
743 Hz (in X and Y)
167 Hz (in X and Y)
153 Hz (in X and Y)
467 Hz (in Z)
400 Hz (in X and Y)
367 Hz (in Z)
233 Hz
Maximum power
2
consumption
20 W (in X and Y)
86 W (in X and Y)
20 W (in X and Y)
18 W (in X and Y)
24 W (in Z)
46 W (in X and Y)
29 W (in Z)
28 W
P­73x Nanopositioner