Quick Start; Activating Sitrans Lr250; Measurement Mode (Run Mode) - Siemens SITRANS LR250 Instruction Manual

Quick Start

SITRANS LR250 supports SIMATIC PDM version 6.0 with SP2.
Note:
A Quick Start wizard groups together all the settings you need for a simple application.
There are two ways to access the wizard:
Quick Start Wizard via the handheld programmer
•
Quick Start Wizard via SIMATIC PDM
•

Activating SITRANS LR250

Keep infrared devices such as laptops, cell phones, and PDAs, away from
Note:
SITRANS LR250 to prevent inadvertent operation.
Power up the instrument. SITRANS LR250 automatically starts up in Measurement (RUN)
mode.

Measurement mode (RUN mode)

Normal operation
1
LEVEL
18.91
DATA EXCH.
8
Fault present
S: 0 LOE
If more than one fault is present, the status indicator and text for each fault alternate at
2 second intervals. See
1.
In response to a key press request. For details, see
7ML19985JE01
3
2
[M]
21.40 °C
7
6
General Fault Codes
SITRANS LR250 (HART) – INSTRUCTION MANUAL
on page 35
on page 38
1
1 – toggle indicator for linear units
4
or %
2 – selected operation: level, space,
or distance
3 – measured value (level, space or
distance)
4 – units
5 – bar graph indicates level
6 – secondary region indicates
electronics temperature, echo
confidence, loop current, or
distance
7 – text area displays status
messages
5
8 – device status indicator
S: 53 CONFIG LO
on page 79 for a list.
Navigating in PROGRAM mode
1
on page 73.
Page 33