Operating SITRANS LR250 via
SIMATIC PDM
For a complete list of parameters with instructions, see Parameter Reference
Note:
starting on page 61.
SIMATIC PDM is a software package used to commission and maintain SITRANS LR250 and
other process devices. Please consult the operating instructions or online help for details on
using SIMATIC PDM. (You can find more information at www.fielddevices.com: go to Products
and Solutions > Products and Systems > Process Device Manager.)
Functions in SIMATIC PDM
SIMATIC PDM monitors the process values, alarms and status signals of the device. It allows
you to display, compare, adjust, verify, and simulate process device data.
For information on adjusting parameter values and viewing the results, see
values for Point and Offset directly into the dialog boxes.
on page 57.
SIMATIC PDM Rev. 6.0, SP2 Features
The graphical interface facilitates the following tasks:
•
Configuring LR250 for a simple application: see
PDM
on page 38.
•
Volume measurement in an irregular vessel: see
Start wizard
•
Level monitoring: see
•
Echo monitoring: see
•
Level trend monitoring: see
into the dialog boxes.
•
False Echo Suppression: see
Manual TVT Shaper
Accessing Functions
You have access to a number of functions via pull-down menus from the menu bar View
menus include: Display (real-time), Echo Profile, and Trend (level over time) diagram, among
others.
Page 52
SITRANS LR250 (HART) – INSTRUCTION MANUAL
on page 42.
Online Display
Echo profile saving
Alternatively, enter values for Point and Offset directly
on page 56
Auto False Echo Suppression Setup
on page 56.
on page 56 and
Quick Start Wizard via SIMATIC
Using Linearization via the Quick
on page 53
on page 56
Alternatively, enter
Accessing Functions
on page 55 and
7ML19985JE01