Table of Contents
Advertisement
Flap
2 (min. 100 oz-in torque) (Futaba S9452 FUTM0662)
OR
Tactic TSX47 (TACM0247)
Throttle
1 (standard) (Futaba S9001 FUTM0075)
Total 7 servos
(2) 40" Servo Extension (FUTM4148) (for aileron servos)
OR
(2) 36" Servo Extension (TACM2726)
(2) 16" Futaba Heavy-Duty Servo Extension (FUTM4145)
(for fl ap servos)
OR
(2) 12" Tactic Servo Extension (TACM2093)
(2) Y-Harness (FUTM4135) (TACM2751) (for connecting
the aileron servos and fl ap servos)
(1) Heavy-Duty On/Off Switch (FUTM4390) (TACM2761)
Additional Items for Electric Motor Installation
(1) 16" Futaba Heavy-Duty Servo Extension (FUTM4145)
(for ESC)
OR
(1) 12" Tactic Servo Extension (TACM2093)
(1) 3200mAh LiFe Receiver Battery (HCAM6446)
OR
(1) Castle Creations BEC 2.0 20A Max (CSEM1540)
(1) 1" x 6" Adhesive-Backed Velcro (GPMQ4480)
Additional Items for Gas Engine Installation
(1) 8" Futaba Servo Extension (FUTM4140) (for the
throttle servo)
OR
(1) 6" Tactic Servo Extension (TACM2700)
(1) Heavy-Duty On/Off Switches (FUTM4390)
(TACM2761) for ignition
(1) 1300mAh LiFe Ignition Battery (HCAM6411)
(1) 3200mAh LiFe Receiver Battery (HCAM6446)
Advanced Radio Set-Up
The Advanced Set-up has each servo plugged into the
receiver on its own channel. The channels can then be mixed
together using the transmitter. This method will require a
7-channel receiver.
Futaba R617FS 7-channel FASST receiver (FUTL7627)
The same servos used in the Basic Radio Set-up.
(2) 40" Servo Extension (FUTM4148) (for aileron servos)
OR
(2) 36" Servo Extension (TACM2726)
(2) 16" Futaba Heavy-Duty Servo Extension (FUTM4145)
(for fl ap servos)
OR
(2) 12" Tactic Servo Extension (TACM2093)
(1) Heavy-Duty On/Off Switch (FUTM4390) (TACM2761)
Additional Items for Electric Motor Installation
(1) 16" Futaba Heavy-Duty Servo Extension (FUTM4145)
(for ESC)
OR
(1) 12" Tactic Servo Extension (TACM2093)
(1) 3200mAh LiFe Receiver Battery (HCAM6446)
OR
(1) Castle Creations BEC 2.0 20A Max (CSEM1540)
(1) 1" x 6" Adhesive-Backed Velcro (GPMQ4480)
Additional Items for Gas Engine Installation
(1) 8" Futaba Servo Extension (FUTM4140) (for the
throttle servo)
OR
❍ (1) 6" Tactic Servo Extension (TACM2700)
(1) Heavy-Duty On/Off Switches (FUTM4390)
(TACM2761) for ignition
❍ (1) 1300mAh LiFe Ignition Battery (HCAM6411)
❍ (1) 3200mAh LiFe Receiver Battery (HCAM6446)
S.BUS System
A Cutting-Edge Alternative to Standard Servo
Installation!
The innovative Futaba S.Bus system lets you unleash your
fl ight system's full potential and cut down on cable clutter
at the same time. It uses digital serial data communication
technology to transmit control signals between your receiver
and servos. A single S.Bus cable can carry signals to as
many channels as your transmitter can handle. You no longer
have to worry about plugging in the wrong servo to the
wrong channel, because each servo knows what channel it
is dedicated to in advance.
SBD-1 S.Bus Decoder Cables allow the use of existing
analog and digital servos, too. By providing today's pilots
with tomorrow's technology, the Futaba S.Bus system is
nothing short of revolutionary.
Installing the S.Bus System
Installation is actually simplifi ed as compared to your normal
system installation. Using the S.Bus system you plug a battery
into the SBC-1 channel changing tool, using it to program
which channel you want the servo to operate on.
Servo
Battery
Channel
Changing
Tool
and plug them into the S.Bus lead, piggybacking them one
onto another. Once completed, you plug one lead into the
receiver for all of the servos and all of the servos will function
as programmed. One lead operates up to 16 servos!
4
Once programmed, the
servo will operate as
required, regardless of
which lead it is plugged into.
Do this for all of the servos
that you want to operate on
the S.Bus system. Install
the servos in the airplane
Advertisement
Table of Contents
