Install The Rudder And Elevator Servos - GREAT PLANES GIANT BIG STIK XL 55-61cc/EP ARF Instruction Manual

5. Install the main landing gear on the fuselage.

Install the Rudder and Elevator Servos

1. Make a battery strap from the supplied hook-and-
loop material.
2. Wrap the receiver battery in foam and secure it to the
battery tray with the hook-and-loop strap.
Note: If the plane will be powered with an electric motor a
Castle Creations BEC 2.0 20A MAX can be used instead
of the receiver battery. The BEC 2.0 20A MAX powers the
receiver from the 12S motor battery.
3. Wrap the receiver in foam and secure it to the battery
tray using the remaining pieces of hook-and-loop material
cut for the receiver battery.
4. Install the on/off switch and the optional charge receptacle.
18