Get The Model Ready To Fly; Check The Control Throws; Set The Control Throws - GREAT PLANES GIANT BIG STIK XL 55-61cc/EP ARF Instruction Manual

Table of Contents

Advertisement

GET THE MODEL READY TO FLY

Check the Control Throws

WARNING:
The propeller should not be installed on the
electric motor at this time!
1. Switch on the transmitter and receiver.
2. Center the control surfaces.
RADIO SET UP
RUDDER
MOVES
RIGHT
FULL
THROTTLE
3. Make certain that the control surfaces and the carburetor
or motor respond in the correct direction as shown in the
diagram. If any of the controls respond in the wrong direction,
use the servo reversing in the transmitter to reverse the servos
connected to those controls. Be certain the control surfaces
have remained centered. Adjust if necessary.

Set the Control Throws

1. Hold a ruler against the widest part of the control surface
and measure the high rate throw fi rst.
26
(STANDARD MODE 2)
RIGHT AILERON
MOVES UP
LEFT AILERON
MOVES DOWN
ELEVATOR
MOVES DOWN

Advertisement

Table of Contents
loading

Table of Contents