Table of Contents
Advertisement
6. Install the two fuel pickup lines (not included), gasoline
compatible, and two clunks.
7. Secure the fuel line to the pickup tubes and the clunks
with small tie straps.
8. Insert the fuel tank stopper in the fuel tank with the vent
tube towards the top and tighten the stopper screw. Mark
the top of the tank.
9. Install the ignition switch. A charge receptacle can also
be installed.
10. Wrap the ignition module and ignition battery in
foam rubber.
11. Make two hook-and-loop straps and secure the ignition
module and ignition battery to the front of the fuel tank tray.
Plug the ignition battery into the ignition switch and the
ignition switch into the ignition module.
12. Install the gasoline compatible fuel line (not included)
on the tank.
23
Advertisement
Table of Contents
