GREAT PLANES GIANT BIG STIK XL 55-61cc/EP ARF Instruction Manual page 10

5. Trim the covering from over the aileron servo opening.
6. Route the servo extension, S.Bus Hub or S.Bus
Decoder through the wing.
7. Drill servo screw mounting holes.
8. Install the servo screws.
9. Remove the servo screws and servo.
10. Apply a drop of thin CA in each hole to harden wood.
After the CA has cured, reinstall the servo and servo screws.
11. Plug the aileron servo into the receiver or plug the
S.Bus servo or Decoder into the S.Bus port of the receiver.
Switch on the transmitter and plug the receiver battery into
the receiver. Center the trims on the transmitter.
12. Install servo horn.
10