Information For Persons Responsible For Plants And Systems; Proper Usage; Figure 2-1 Esd Information - Siemens SINAMICS PERFECT HARMONY GH150 6SL3826 Operating Instructions Manual

Medium-voltage drive
Table of Contents

Advertisement

Safety instructions

2.7 Information for persons responsible for plants and systems

a = Conductive floor covering
c = ESD shoes or ESD shoe grounding strips
e = ESD wrist strap
1)
2)
Figure 2-1
2.7
Information for persons responsible for plants and systems
2.7.1

Proper usage

These devices are intended to be permanently installed in closed and dry rooms with a clean
atmosphere. You can find the ambient and operating temperatures to be adhered to in the
technical data. If the described environmental conditions are not observed, warranty claims
and other claims may be rejected.
Danger to life as a result of an explosion
If you operate the device in a hazardous zone, explosions can occur which can cause death,
serious injuries or material damage.
● Never operate the device in an explosive atmosphere (hazardous zone).
Danger to life when not complying with proper use of the devices
Improper use of the devices described can result in death, severe injury or material damage.
● Please observe all instructions for proper use.
The nominated person in control of an electrical installation must ensure that the following
points are observed:
● Follow the local and industry-specific safety and setup regulations. Observe the
● The operating instructions and the complete product documentation are always available
● The technical data as well as the specifications relating to the permissible installation,
18
Only effective in conjunction with ESD shoes or ESD shoe grounding strips
Only effective in conjunction with conductive floor covering
ESD information
requirements in the guidelines specified in the "Standards and regulations" section of the
"Technical data and drawings." Ensure that the specific safety and construction regulations
and the regulations for using personal protective equipment are observed during all work.
when carrying out any work.
connection, ambient and operating conditions are taken into account at all times.
1)
2)
b =
ESD furniture
d =
ESD clothing
f =
Cabinet ground connection
SINAMICS PERFECT HARMONY GH150 6SL3826
Operating Instructions 05/2020

Advertisement

Table of Contents
loading

Table of Contents