Figure 4-3 Transporting A Transportation Unit (Still In Packaging) With A Crane - Siemens SINAMICS PERFECT HARMONY GH150 6SL3826 Operating Instructions Manual

Preparations for use
4.3 Transport
Transportation with the crane
Danger due to falling transport unit/cabinet
If the lifting gear or load suspension devices were to fail, the transportation unit/the cabinet
could fall. Death, serious injury, or material damage can result.
● Do not stand underneath or near to a raised load.
To protect the boxes against pressure, use sufficiently long rope and a spreader beam. Please
proceed as follows:
1. Attach the rope/cable to the pallet as shown in the following diagram.
2. Attach the rope/cable to the spreader beam
3. Pay attention to the center of gravity imprinted on the box
4. Carefully raise the transportation unit.
See also
Transport with a fork-lift truck (Page 60)
62
WARNING
③
the ropes .
①
Spreader beam
②
Center of gravity
③
Imprinted position of the rope
Figure 4-3 Transporting a transportation unit (still in packaging) with a crane
①
and the crane hook.
②
and the imprinted position of
SINAMICS PERFECT HARMONY GH150 6SL3826
Operating Instructions 05/2020