Table of Contents
Advertisement
Maintenance
9.7 Repair
5. Mount the new operator panel.
6. Reconnect the power supply and communication cable at the operator panel.
Additional information about the HMI operator panel is provided in the "HMI Function Manual".
9.7.11
Replacing the CompactFlash card
To replace the CompactFlash card, proceed as follows:
1. Ensure that the Control Unit is de-energized.
2. Withdraw the CompactFlash card from the Control Unit. Back up the data saved on it.
3. Copy the stored data of the previous CompactFlash card to the new original Siemens card.
4. Insert the new Siemens CompactFlash card.
118
NOTICE
Destruction of the CompactFlash card
The CompactFlash card must only be inserted or removed when the power is off.
Otherwise there is a risk of data loss or damage to the card, which would prevent
commissioning of the drive.
● Only remove or insert the CompactFlash card when the power is switched off.
Note
Invalid software key
The software key is associated with the serial number of the CompactFlash card. If you
overwrite the software key of the new CompactFlash card with the previous CompactFlash
card, the new CompactFlash card is not operational.
Consequently, use the software key of the new CompactFlash card.
SINAMICS PERFECT HARMONY GH150 6SL3826
Operating Instructions 05/2020
Advertisement
Table of Contents
