Table of Contents
Advertisement
Assembly
When carrying out any work, carefully observe the information provided in Chapter "Safety
instructions (Page 13)".
5.1
Safety instructions for assembly
Material damage caused by improper installation
The devices can be damaged through improper installation.
● Install the devices as described in the following sections.
● Take note of the ambient temperatures stated in the technical specifications.
● Avoid any inadmissible load and stress.
Danger due to defective seals
When working on the device, seals at the doors, roof panels as well as front, rear and side
panels can be damaged. Operation with defective seals can result in death, serious injury or
material damage.
● Replace the defective seals before commissioning.
● Observe the environmental conditions stated in the technical data.
Danger as a result of dirt and pollution inside the device
When performing mounting and installation work, dirt can accumulate inside the device when
the doors are open. Dirt deposits can can mean that the requirements relating to cleanliness are
no longer fulfilled. If the device is operated with dirt inside it, then this can result in death, serious
injury and material damage.
● Therefore, remove dirt deposits after installation.
● Then keep the doors closed.
● The device must be professionally cleaned in the event of pollution in the form of conductive
SINAMICS PERFECT HARMONY GH150 6SL3826
Operating Instructions 05/2020
dust particles (e.g. from welding work). Contact the service center in this regard.
5
67
Advertisement
Table of Contents
