Medema A/S
Service manual 1533-2002-S
Replace the magnetic brake
Raise the rear end so the wheels are
lifted of the ground.
Now there is access to the magnetic
brake.
Check the distance to the magnet. If
the measure is more than 0,35 mm, It
is worn, and has to be replaced. The
distance on a new magnetic brake is
0,15 mm.
Remove the cover - three screws.
Remove the three screws to dismantle the
magnetic brake. They where all greased
with locktite when they were mounted.
Disconnect the four plugs, and the
magnetic is free to be removed.
98 of 122
Version 1.0.5 - 2021