Service Summary For Mini Crosser X2 Model - medemagroup Mini Crosser X2 4W Service Manual

Medema A/S
Service manual 1533-2002-S

Service summary for Mini Crosser X2 Model

Area Component
Suspension and Rear suspension
wheels
Check that no cables
can be trapped by
moving parts.
Check the wheels
Check the tyre pres-
sure and tread.
Check that the hand-
brake is working.
3W: Front fork. Sus-
pension and straight-
ness.
3W: Front wheel.
4W: Front suspension.
Check and remedy
Check whether the rear of the scooter is
drooping. The rear wheel must not rub
on the mudguard with a load on the seat.
Replace the shock absorbers/springs be-
hind the batteries. See the Spare Parts
Catalogue.
Check the shock absorbers for oil leaks.
Check that the swivel axle/transaxle is
securely mounted. Retighten or fit bolts/
nuts.
Fit cable ties.
Check the fastenings and the condition
of the rims.
Recommended tyre pressure: 2.8 bar
(50 psi)
The minimum tread depth for good grip
is approx. 1 mm.
See the Spare Parts Catalogue for disas-
sembly. NB! The rear and front wheels
on the 4W MUST always be removed
using the five bolts. NEVER undo the
actual flange using the bold in the centre.
See the Spare Parts Catalogue. NB!
ALWAYS let the air out of the inner tube
before taking a wheel apart!
Lubricate the lever arm on the brake hub
with acid-free oil. Adjust the cable length
using the adjusting nipple. If parts are
defective: See the Spare Parts Cata-
logue.
Check that the front fork can bounce. Is
it crooked?
Is there an oil leak?
If there is a defect that needs to be re-
paired, replace the entire front fork. See
the Spare Parts Catalogue.
Check the ball bearings for play and
wear.
Check that the front wheels do not hit the
underside of the front mudguards.
Check that the rubber dampers are
secure. They should just touch the axle
beam. See the Spare Parts Catalogue.
Check that the T-suspension block is
working and does not droop.
51 of 122 Version 1.0.5 - 2021