Brakes - medemagroup Mini Crosser X2 4W Service Manual

Hide thumbs Also See for Mini Crosser X2 4W:
Table of Contents

Advertisement

Medema A/S
Service manual 1533-2002-S

Brakes

There are four braking systems on the Mini Crosser:
Motor brake - adjusts vehicle speed also when going downhill.
Magnetic brake - the magnetic brake is automatic and engages
when the Mini Crosser stops. In an emergency, the Mini Crosser
can be stopped instantaneously by turning the key switch. Please
note that this will cause very sharp braking.The brake must never
be disengaged mechanically using the disengagement lever on
a slope. This function is only designed for use when pushing the
Mini Crosser on a flat road.
Electric safety brake - if the brake is somehow disengaged on
a slope/hill, the Mini Crosser will brake automatically when it
reaches a certain speed. There is an electric safety feature in the
control system, which works even if the battery is disconnected.
This is also the reason why the Mini Crosser cannot be towed at
more than 5 km/h. See the section about towing.
Hand brake - intended as an emergency brake and parking brake.
It must be operated with caution when driving in slippery condi-
tions and downhill.
When using the handbrake as a parking
brake, lock it in braking position by
pressing the button in while applying the
brake.
To release the brake, press the button
again.
Handbrake lock
42 of 122
Version 1.0.5 - 2021

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mini crosser x1 4wMini crosser child x1 3wMini crosser child x2 3wMini crosser x2 3wMini crosser x1 3w

Table of Contents