Medema A/S
Service manual 1533-2002-S
Changing the wheels
If you get a puncture in one of the pneumatic tyres or if a tyre
is so badly worn that it needs to be replaced, follow the instruc-
tions below.
Tyres and inner tubes can be purchased from the authorised
dealer who supplied the Mini Crosser.
The Mini Crosser must be TURNED OFF before you start.
REMEMBER!
•
to let all the air out before taking
the wheel apart to repair a punc-
ture
•
to secure the bolts with spring
washers
Changing the wheels on
the 4W model
Remove the hubcap.
5 mm Allen key
•
•
•
The bolts must be done
up tightly.
Remove the valve cap
and use a screwdriver or
similar to open the valve
so that the air can be
released.
72 of 122
Undo the five bolts.
Take the wheel off.
When the wheel is put
back on, the spring
washers must be refitted
between the wheel rim
and bolts.
Important!
There is a risk of
explosion of the
wheel, if the two
rims are being
taken apart with air
in the tire.
Version 1.0.5 - 2021