Table of Contents
Advertisement
Medema A/S
Service manual 1533-2002-S
Programming the User Menu
Access the menu by holding the Menu/information button for
approx. 3 sec. Scroll up and down with the + / -button under the
display. The active parameter is highlighted with yellow writing
and blue background. Access the value of the selected param-
eter by pressing Enter. Change the value using the +/- button.
Confirm with Enter and exit with the Menu/information button.
Parameter description
Date Format
Choose between:
ddmmyy - day/month/year
mmddyy - month/day/year
yymmdd - year/month/day
Temp. unit
Choose between Celsius or Fahrenheit. Displays ambient
(Temp. unit is extra)
temperature.
Limited speed
Limited speed On/Off.
(On/Off)
To edit this function you will be asked for a 4 digit code.
From the factory this code is set to be 1234, but it can be
altered by a service technician.
Use the +/- button to each digit. Go to the next digit with the
"Next" button. Confirm with "Enter" Turn this parameter On/
Off – Confirm with "Enter".
Limited speed (value) Limited speed - value.
To edit this function you will be asked for a 4 digit code.
From the factory this code is set to be 1234, but it can be
altered by a service technician. Use the +/- button to set
% value, that you want the Mini Crosseres max speed
reduced to. Move in increments of 5%.
Backlight (value)
The displays backlight can be changed in increments of
5%. Typically used in winter or when driving in darkness,
where the intense light from the display may seem annoy-
ing.
Backlight auto
Selecting "On" reduced intensity of the backlight
(On/Off)
automatically when darkness falls or when driving into
a tunnel or similar. Light sensor sits just above the light
switch. See the Control panel.
Backlight threshold
Here max. light intensity is shown in%. Move in increments
of 5%.
Reverse Buzzer (Off/
Same warning horn as it is known from trucks in reverse
Beep/Buzze)
gear.
Choose from "Off", "Beep" - low horns, or "Buzzer" - sharp
horns.
Keyboard sound
With ON / OFF select whether to be acknowledged with a
(On/Off)
little beep when you press the contacts on the dashboard.
These are: flashing, lights, hazard, menu, arrows and
MENU keys.
Blinker sound (Off/
Choose whether you want a sound when flashing lights on
Beep/Buzze)
the Mini Crosser is on. Just as we know it from a car. You
can
select "Off", "Beep" - low horns, or "Buzzer" - sharp horns.
18 of 122
Version 1.0.5 - 2021
Advertisement
Table of Contents
