Introduction To The Eblo Seat - medemagroup Mini Crosser X2 4W Service Manual

Medema A/S
Service manual 1533-2002-S

Introduction to the Eblo seat

This lever is located on the right side as standard, but can also
be positioned on the left side.
in the closest position.
There is a stop on the front and the back of the slide rail.
The lever for turning the seat.
Pull the lever up to release
the seat. The seat can then be
rotated 90° to each side, locking
at each 45°.
The lever is spring-loaded, and
the seat is locked automatically
when the lever is released.
Lever for fore/aft adjustment
of the seat.
Pull the lever up to release the
seat on the slide rail. Then the
seat can be moved forward or
backward as you wish. When
the lever is released, the seat
will automatically lock into place
Adjusting the angle of the
armrests
The angle of the armrests can
be adjusted by turning this
screw.
109 of 122 Version 1.0.5 - 2021