Table of Contents
Advertisement
Medema A/S
Service manual 1533-2002-S
General care and maintenance
A Mini Crosser X2 does not require much maintenance. It
should be kept in a generally good condition, however. The fol-
lowing should be checked regularly:
•
Tyre pressure (if pneumatic tyres are fitted)
•
Tyre wear
•
Keep the control panel, the charging socket and the electronics
box under the seat dry.
•
Battery charging
Never wash the Mini Crosser with a high-pressure cleaner or di-
rect water jet! This could damage the Mini Crosser's electronics.
To keep the Mini Crosser in good condition safety-wise, we rec-
ommend the following regular checks:
Daily:(User)
•
Test the indicators and driving lights before using the Mini Crosser
in the dark or poor visibility.
Every three months: (User)
Test the brakes and motor disengagement
With the disengagement lever up, it must not be possible to
push the Mini Crosser.
Test the brake disengagement function
When the brake disengagement lever is down, the battery indi-
cator should flash to show an error if the Mini Crosser is turned
on. In this case the Mini Crosser must not be able to move
when the accelerator is activated.
Test the handbrake
Apply the handbrake for a couple of seconds at low speed. This
will ensure that the lever arm and brake shoes do not seize up.
Lubricate the lever arm on the brake hub with acid-free oil - left-
hand rear wheel.
35 of 122
Version 1.0.5 - 2021
Advertisement
Table of Contents
