Long Hills/Difficult Ground - medemagroup Mini Crosser X2 4W Service Manual

Hide thumbs Also See for Mini Crosser X2 4W:
Table of Contents

Advertisement

Medema A/S
Service manual 1533-2002-S
Across a slope
Lean into the slope.
Avoid sudden and sharp movements. This is particularly relevant
when reversing.
Always drive at low speed.

Long hills/difficult ground

The Mini Crosser is at risk of overheating on very long and
steep hills or on very soft ground, possibly also combined with
high user weight.
To protect the Mini Crosser motor from overheating, there is a
built-in thermo switch, which initially sets the Mini Crosser to
half speed.
However, if you carry on moving over difficult ground, the Mini
Crosser will at some stage stop completely. The Mini Crosser
must be left to cool down for 3-5 minutes before it can start
again.
To reset the fault, switch off the Mini Crosser then turn it on
again.
If the Mini Crosser has not had long enough to cool down when
it is restarted, it will initially only run at half speed.
Note:
The situation described above will never happen in normal use.
It only happens if the conditions are extremely challenging.
33 of 122
Version 1.0.5 - 2021

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mini crosser x1 4wMini crosser child x1 3wMini crosser child x2 3wMini crosser x2 3wMini crosser x1 3w

Table of Contents