Replace Cable For Hand Brake - medemagroup Mini Crosser X2 4W Service Manual

Medema A/S
Service manual 1533-2002-S

Replace cable for hand brake

Raise the rear end so the wheels are
lifted of the ground. Remove the rear
wheel.
Press the hand brake once. The brake
cable will poke out. Grab the cable and
pull it out.
Cut the end stop off.
Cut the brake cable.
A new bake cable. Mostly only the inner
cable need to be replaced. Pull the inner
cable out.
Pusch the cable through the hand brake
handle and into the outer cable. Loosen
the outer cable from the hand brake, for
easier access.
96 of 122 Version 1.0.5 - 2021