Advanced Fax Operations (Monochrome Only); Fax Forwarding - Brother MFC-465CN User Manual

Advanced fax operations
9
(Monochrome only)
You can only use one advanced fax
operation at a time:

Fax Forwarding

Fax Storage
PC Fax Receive
Off
You can change your selection at any time. If
received faxes are still in the machine's
memory when you change the advanced fax
operations, a question will appear on the
LCD. (See Changing Advanced Fax
Operations on page 60.)
Fax Forwarding
When you choose Fax Forward, your
machine stores the received fax in the
memory. The machine will then dial the fax
number you have programmed and forward
the fax message.
a
Press Menu.
b
Press a or b to choose Fax.
Press OK.
c
Press a or b to choose
Advanced Fax Operation.
Press OK.
d
Press a or b to choose
Forward/Store.
Press OK.
e
Press a or b to choose Fax Forward.
Press OK.
f
Enter the forwarding number (up to 20
digits).
Press OK.
g
Press a or b to choose
Backup Print:On or
Backup Print:Off.
Press OK.
Note
• If you choose Backup Print:On, the
machine will also print the fax at your
machine so you will have a copy. This is
the safety feature in case there is a power
failure before the fax is forwarded or a
problem at the receiving machine.
• When Fax Forwarding is turned on your
machine will only receive monochrome
faxes into memory. Colour faxes will not
be received, unless the sending machine
converts them to monochrome before
sending.
h
Press Stop/Exit.
9
9
9
57