Setting The Ring Volume; Memory Storage - Brother MFC-730 Owner's Manual

41
I N I T I A L S E T U P

Setting the Ring Volume

You can adjust the ring volume when your MFC is idle. You can turn the
ring OFF.
Press or to adjust the volume level. With each key press, the MFC
rings so you can hear the current setting and the display shows the setting
you are choosing. Each key press changes the volume to the next setting.
The new setting will remain until you change it again.

Memory Storage

In the event of a power failure, all settings in the INITIAL SETUP,
SETUP RECEIVE, SET QUICK-DIAL, REMOTE FAX OPT (MFC-
730), and SETUP TAD (MFC-740), plus the COVERPG SETUP and
COVERPAGE NOTE (from SETUP SEND) functions are stored
permanently. You may have to reset the date and time.
On the MFC-740, it will retain the data for Out-of-Paper Reception and
Message Manager for up to 6 hours after a power interruption.