Change Answer Mode; Using Remote Access Code; Exit Remote Operation - Brother MFC-730 Owner's Manual

Change Answer Mode

Press 9 8
then for TAD, press 1.
(For MFC-730)

Exit Remote Operation

Press 9 0.
Change Remote Access Code
1 Press Menu, 1, 8, 3.
2 Enter the 3-digit number. The
changed.
3 Press Set.
(For MFC-740)
4 Press Stop to exit.
Retrieve all faxes press 2, then
enter the number of remote fax
machine, and then # #. After the
beep, hang up and wait.
Erase all fax messages press 3.
Check Receiving Status
Press 9 7
then for Fax message, press 1.
Voice message, press 2.
1 long beep — received messages
3 short beeps — no messages
Change Answer Mode
Press 9 8
then for Message Manager (TAD mode),
press 1.
Fax/Telephone (F/T), press 2.
Fax Only, press 3.
Exit Remote Operation
Press 9 0.
Fax/Tel (F/T), press 2.
Fax, press 3.
cannot be
5
R C
EMOTE ONTROL

Using Remote Access Code

1 Dial your machine phone number from a
touch tone phone.
2 Enter your Remote Control Access Code
(159 ) after the beep.
3 Your machine signals the kinds of messages
received:
1 long beep — Fax message(s)
No beeps — no messages
4 After 2 short beeps, enter a command.
5 Press 9 0 to reset your machine when you
finish.
6 Hang up.
4
M M
ESSAGE
R C
EMOTE ONTROL
Using Remote Access Code
1
Dial your MFC phone number from a
touch tone phone.
2 Enter your Remote Control Access Code
(159 ) after the beep.
3 The MFC signals the kinds of messages
received:
1 long beep — Fax message(s)
2 long beeps — Voice message(s)
3 long beeps — Fax and Voice message(s)
No beeps — no messages
4 After 2 short beeps, enter a command.
Press 9 0 to reset the MFC when you
5
finish.
6 Hang up.
6
203
A C
CCESS ARD
1
ANAGER
A C
CCESS ARD
1