Setting The Ring Delay; Setting The F/T (Fax/Tel) Ring Time (For Fax/Tel Mode Only) - Brother MFC-730 Owner's Manual

Setting the Ring Delay

See
"Operation
from an The Ring Delay setting determines the number of times the MFC rings
External or
before it answers.
Extension
1
Telephone"
and
2
"For Fax/Tel
3
Mode Only"
in this
chapter
4
5
Setting the F/T (Fax/Tel) Ring Time
(For Fax/Tel Mode Only)
You need to determine how long the MFC will give its special F/T
pseudo-ring when you have a voice call. This ringing happens after the
initial ringing from the phone company. Only the MFC rings, for 20, 30,
40, or 70 seconds; no other phones on the same line ring the special F/T
See
pseudo ring. However, you can answer the call on any extension phone
"Operation
from on a separate wall socket on the same line as the MFC.
Extension
1
Telephone" in
this chapter 2
3
4
Now, when a call comes in and the MFC is set to Fax/Tel Mode, all
phones on this line will ring the number of times you selected in Ring
Delay.
You can let the MFC pick up and detect if it's a fax or voice call. If it's a
fax call, the MFC prints the fax. If it's a voice call, the MFC signals you
with an F/T pseudo-ring for the length of time you selected in F/T Ring
Time.
Even if the caller hangs up during the F/T pseudo-ringing, the MFC
continues the F/T pseudo-ringing for the set time.
Please note that some faxes cannot be received automatically in Fax/Tel
mode, because some fax machines do not send the standard Group 3
calling tone ("CNG").
Press Menu, 1, 2, 1.
Press Set.
Press or to select how many times the line rings before the
MFC answers (01-04).
Press Set when the screen displays your selection.
Press Stop to exit.
Press Menu, 1, 2, 2.
Press or to select how long the MFC will ring to alert you that
you have a voice call.
Press Set when the screen displays your selection.
RING TIME:30 SEC
Press Stop to exit.
S E T U P R E C E I V E
45