Setting Pc Interface Mode - Brother MFC-730 Owner's Manual

58
C H A P T E R S I X
4
If you selected STANDARD, the screen prompts you to enter the fax
number you want to poll, and then to press Start.
ENTER FAX NO.
ONLINE
THEN PRESS START
ONLINE
• If you selected SECURE, enter a four-digit number and press
Set.
• If you selected TIMER, enter the time (in 24-hour format) you
want to begin polling and press Set.
5
Specify the destination fax machines, which you wish to poll by
using One Touch, Speed Dial, a Group, Tel-Index or the dial pad.
You must press Help/Broadcast between each location.
6
Press Start.
Your MFC polls each number or group number in turn for a
document.
DIALLING

Setting PC Interface Mode

If you connect your MFC to your PC, you can receive faxes into your
PC. After completing all setup for Multi-Function Link Pro for Fax, you
can select PC Interface Mode (ON/OFF) for routing incoming faxes.
1
Press Menu, 1, 2, 8.
8.PC INTERFACE
2
Press or to select ON or OFF.
3
Press Set when the screen displays your selection.
4
Press Stop to exit.