Copy Quality - Default Settings; Changing Default Settings - Brother MFC-730 Owner's Manual

92
C H A P T E R E L E V E N
Copy Quality – Default Settings

Changing Default Settings

Press Menu, 3 to change default settings for Copy mode. These settings
will remain until you change them again by pressing Menu. Adjust the
colours using the Colour Adjustment, Brightness, and Contrast settings.
By pressing a number, you can adjust copy settings as shown in the
following chart. Press
setting. Press Set to save your selection. Press Stop to exit —OR—
Press to select the next setting you want to change.
FACTORY DEFAULT SETTINGS
1. PAPER TYPE
2. QUALITY
3. ORIGINAL TYPE
4. COLOUR ADJUST
5. BRIGHTNESS
6. CONTRAST
7. ONE COLOUR
or to move through the selections for each
: PLAIN
: HIGH
: STD
–
: R:
–
: G:
–
: B:
–
:
–
:
: OFF = Black
+
+
+
+
+