Selecting A Single Colour (One Colour); Memory Full Message - Brother MFC-730 Owner's Manual

Selecting a Single Colour (One Colour)

For black and white originals, you can select a single colour, instead of
black, as the default to be used when you press Mono Copy. OFF is the
setting for Black.
1
2
3
4

Memory Full Message

If the memory becomes full while you're making copies, the screen
displays
followed by
If you were scanning the first page of your document, press Stop to
cancel the job and restart to make a single copy. If you were scanning a
subsequent page, press Mono Copy or Colour Copy to print the pages
already scanned—OR—Press Stop to cancel.
You'll need to clear some fax or voice messages to make some additional
memory available before you can continue.
To gain extra memory, you can erase any of the following types of
messages:
Press Menu, 3, 7.
Press or to select a copy colour: The options are OFF, RED,
GREEN, BLUE, CYAN, MAGENTA, and YELLOW.
When the screen displays your selection, press Set.
Press Stop to exit.
MEMORY FULL P.02
ONLINE
COPY TO COPY
ONLINE
STOP TO ABORT
ONLINE
• To erase incoming messages (ICMs) and memos. See Erasing
Messages in chap. 12. (Only for MFC-740)
• To print fax message stored in memory. See Printing a Fax
Message in chap. 12. (Only for MFC-740)
C O P Y O P E R A T I O N S
97