Manual Feed Slot; Setup For Envelopes - Brother MFC-730 Owner's Manual

118
C H A P T E R T H I R T E E N
4
Close the feeder cover.

Manual Feed Slot

You can use only one sheet at a time in the Manual Feed Slot. Paper
loaded in the Manual Feed Slot is printed first, even when there is some
paper left in the Feeder.
If you want to print more than one page using the Manual Feed Slot, on
your PC, in the printer driver Properties Paper tab, select "manual feed".
1
Load one sheet of paper in the Manual Feed Slot, holding it with
both hands. Align the paper in the center of the feeder.
2
Gently push the paper all the way down in the slot.
3
Adjust the guides to make sure the paper is straight and centered to
prevent a paper jam or misfeed.
If you do not insert paper in the manual feed slot, the MFC will print
from the cassette.

Setup for Envelopes

You can use the manual feed slot to print one envelope at a time.
1
Adjust the paper setting in the printer driver.
2
Open the top cover.
3
Lift the purple paper thickness adjustment lever down panel.
4
Close the top cover.
5
Insert an envelope into the manual feed slot sideways, with the print
side face up.