Safety Instructions - Nakayama MB6000 Manual

FORWORD
Thank you for purchasing a tiller.
This manual covers operation and maintenance of the tiller. All information in this publication is
based on the latest product, information available at the time of approval for printing. We reserves
the right to make changes at any time without notice and without incurring any obligation.
This manual should be considered a permanent part of the tiller and remain with it if it is resold.
Pay special attention to statements preceded by the following words.
WARNING Indicates a strong possibility of severe personal injury or death if instructions are
not followed.
CAUTION: indicates a possibility of personal injury or equipment damage if instructions are not
followed.
NOTE: Gives helpful information.
If a problem arised, or if you have any questions about the tiller ,please consult an authorized dealer.
WARNING: The tiller is designed to give safe and dependable service if operated according to
instructions. Read and understand the Owner's Manual before operating the tiller. Failure to do so
could result in personal injury or equipment damage.
The illustration may be varied with type.

SAFETY INSTRUCTIONS

WARNING
To ensure safe operation
For your safety and safety of others. Please pay special attention to these precautions.
This tiller is designed to give safe and dependable
service if operated according to instructions.
Read and understand the Owner's Manual before
operating the tiller. Failure to do so could result in
personal injury or equipment damage.
The rotating parts are sharp and they turn at high
speed. Accidental contact can cause serious injury.
Keep your hands and feet away from the parts while
engine is running .
Stop the engine and disengage the tines clutch before
inspection or maintenance of tines.
Disconnect the spark plug cap to prevent any
possibility of accidental starting .Wear heavy gloves
to protect your hands from the tines when clearing the
tines or when inspecting or replacing the tines.
Operator Responsibility
Keep the tiller in good operating condition. Operating a tiller in poor or questionable condition could
result in serious injury.
Be sure all safety devices are in working order and warning labels are in place. These items are
installed for you safety.
Be sure the safety covers (Fan cover, recoil starter cover ) are in place.
Know how to stop the engine and tines quickly in case of emergency. Understand the use of all
controls.
Keep a firm hold on the handlebars, they may tend to lift during clutch engagement.
23
.N
WWW
T
AKAYAMA
.
OOLS COM