Use Of A Hitch Box; Front Wheel - Nakayama MB6000 Manual

Gear shifting :
·Return the throttle lever to the
extreme right.
·Release the clutch lever to disengage
the clutch.
·Move the shift lever to the desired gear
position.,
NOTE: If the shift lever will not engage the desired gear, squeeze the clutch lever and move the
tiller slightly to reposition the gears.
·Squeeze the clutch lever to engage the clutch.
5. Choose the gear
The tilling machine has the three gears to choose:
Converted method of the gear.
(1) Pulling the throttle switch to right in the direct time (smallest )
(2) Unloosening the clutch handle and let the clutch separate.
(1) Moving the gear shifting arm to your required gear.
(2) Gripping the clutch handle, the engine will work on the converted gear.
1WG4.0-80-FQ-D
-1 0 2 1

6.Use of a hitch box

Install the hitch attachment in the hitch box with a hitch pin.
(1) HITCH BOX
(2) HITCH PIN

7.Front wheel (500)

Use a front wheel to move the tiller on road, lift the handlebars up and ground the front wheel.
When the tiller is used in the field, move the wheel up by replacing the lock pin.
(1) WHEN USED IN THE FIELD
(2) LOCK PIN
(3) WHEN MOVED ON ROAD
31
.N
WWW
T
AKAYAMA
.
OOLS COM