GBC DIGITAL FEEDER Operation & Maintenance Manual page 76

Getting started
INFORMATION
All five belts should fall within the
width of the sheet.
h) Secure the belt guide adjust knobs when
finished.
i) Lower the pull roller on the Explorer 107and
close the front safety shiled.
Pull roller handle
j) Press RUN
OFF
R U N
ON
Page 6 - 4
on the feeder control panel.
OFF
Digital Feeder Operation and Maintenance Manual
j) Slide the feeding head unit forward until 1/32 in.
of the left and right paper spring plates is over
the sheet stack.
k) Adjust the rear left and rear right guides flush
against the sheet stack.
Rear left guide
Rear right guide
© GBC Pro - Tech February 2000
1/32 in.