GBC DIGITAL FEEDER Operation & Maintenance Manual page 51

Digital Feeder Operation and Maintenance Manual
c) Connect the opposite end to the encoder
receptacle on the Explorer 107 Laminator.
Encoder receptacle
Metal ball placement
a) Remove the 13 metal balls from the accessory
bag.
b) Place one metal ball into each of the holes in the
position bar on the sheet guide assembly.
© GBC Pro - Tech February 2000
Optional cutter
The GBC Explorer System™ is composed of
the GBC Digital Feeder, GBC Explorer 107
Laminator and the GBC Digital Cutter. The feeding
head unit of the feeder is equipped with a spare nozzle to
provide air to the cutter.
a) Remove the pneumatic hose from the accessory
bag.
b) Push one end into the air fitting labeled Spare
Nozzle on the back of the feeding head unit.
R E G U L A T O R
MASTER NOZZLE
SPARE NOZZLE
Installation
LEFT VACUUM
RIGHT VACUUM
Page 4 - 17