Section 4 Installation - GBC DIGITAL FEEDER Operation & Maintenance Manual

Digital Feeder Operation and Maintenance Manual

Section 4 Installation

GBC Pro-Tech is committed to a program of
ongoing product improvement. As a result, we are
providing these instructions so that you can insure that
your new Digital Feeder is properly and securely unpacked,
moved, and installed.
Before the Digital Feeder can be installed, there
are a few requirements that must be met. Ensure that each
of the requirements listed in the following pre-installation
checklist are met before beginning installation.
Failure to follow the pre-installation check
list can result in damage to the cutter.
4.1 Pre-installation
A r e d o o r w a y s a n d h a l l w a y s w i d e e n o u g h f o r
t h e D i g i t a l F e e d e r t o b e m o v e d t o t h e
installation site?
Is there ample room for the Digital Feeder?
A w o r k a r e a m u s t b e e s t a b l i s h e d t h a t a l l o w s
for unrestricted movement around the Digital
F e e d e r a n d p r o v i d e s s p a c e f o r e f f i c i e n t
m a t e r i a l f l o w . F i g u r e 4 . 1 . 1 i l l u s t r a t e s a
typical machine area layout.
© GBC Pro - Tech February 2000
CAUTION
E l e c t r i c a l r e q u i r e m e n t s : T h e D i g i t a l F e e d e r
o p e r a t e s o n 1 1 0 V A C , 1 5 a m p s e r v i c e . T h e
plug is standard two prong with a ground.
P n e u m a t i c r e q u i r e m e n t s : 1 0 p . s . i . ( 1 0 k g /
2
c m ).
WARNING
The Digital Feeder is a large and heavy
piece of equipment. It is necessary to
e m p l o y L I C E N S E D R I G G E R S O N L Y t o
move the machine. The machine is not
designed to be tipped up or sideways in any
way. Such action disturbs the exact
alignment of the moving parts of the
machine and requires extensive realignment.
You can be crushed or seriously injured.
INFORMATION
If you have a GBC Digital Cutter inline with
the feeder and laminator, refer to Figure
4.1.2 Optional cutter layout
Installation
Page 4 - 1