Shrink Wrapped - GBC DIGITAL FEEDER Operation & Maintenance Manual

Installation
The unpacking process requires at least two
people. You can be severely injured, crushed
or cause damage to the equipment.
With regards to your shipping methods, use one
of the following procedures described to safely and
properly unwrap / uncrate your cutter.

4.4 Shrink wrapped

Tools required
• # 2 Phillips head screwdriver
• Large adjustable wrench
• Crow bar
• A second person
a) Inspect the machine for any obvious shipping
damages upon receipt.
INFORMATION
Claims for shipping damages must be
handled between your insurance company
and the shipping compnay.
Page 4 - 6
WARNING
Digital Feeder Operation and Maintenance Manual
b) Carefully unwrap the shrink wrap from around
the Digital Feeder.
Do not use an open blade to cut the shrink
wrap from the machine. You can cause
damge to the equipment!
c) Move all packing materials to a safe distance
from the equipment and dispose of properly.
The shrink wrap is not recyclable, therefore
d) Use two people to carefully roll the feeder and
conveyor to the desired location.
Do not attempt to move the Digital Feeder
across anything other than a flat level
surface . You can be crushed
© GBC Pro - Tech February 2000
CAUTION
INFORMATION
it must be discarded.
WARNING
or seriously injured.