GBC DIGITAL FEEDER Operation & Maintenance Manual page 28

Warranty
Qualified
• Any engineer that has experience with electrical
and mechanical design of lamination equipment.The
engineers should be fully aware of all aspects of safety
with regards to lamination equipment.
• Any commissioning or service engineer must be
of competent nature, trained and qualified to GBC Pro-
Tech standards to fulfill that job. This person will have
completed and passed the full service training course from
GBC Pro-Tech.
• Any GBC Technician, GBC Specialist, and / or
GBC Pro-Tech Technician that has been through the GBC
Pro-Tech service training course.
Page 2 - 2
Digital Feeder Operation and Maintenance Manual
© GBC Pro - Tech February 2000