GBC DIGITAL FEEDER Operation & Maintenance Manual page 17

Digital Feeder Operation and Maintenance Manual
INFORMATION
Do not put packing screws on the floor.
They can cause problems when trying to roll
the feeder into position or you can become
injured if stepped on.
A second person must support the side
labeled 5 in Figure 4.5.1 It can fall and
damage the Feeder or cause harm to
you and others.
INFORMATION
The crate components can be reused for
shipping the machine again or may be
disassembled and recycled.
INFORMATION
GBC Pro-Tech's warranty does not cover
malfunction of the equipment due to
mishandling and / or tipping. GBC
Pro-Tech bears no responsibility for
personal injury or damage due to
moving the feeder improperly.
© GBC Pro - Tech February 2000
CAUTION
CAUTION
Do not use a knife or other sharp objects
to remove the strapping / ties from around
the machine. You can cause
damage to the equipment.
WARNING
Always use safe and proper lifting practices
when lifting heavy objects. You can become
seriously injured or crushed.
CAUTION
Do not stand the conveyor on its side. Lay
the coveyor flat on the floor. You can cause
damage to the equipment!
WARNING
Caution should always be exercised
when using the laminator with
the safety shields raised.
You can be seriously HURT or INJURED!
Safety
Page 1 - 5