GBC DIGITAL FEEDER Operation & Maintenance Manual page 45

Digital Feeder Operation and Maintenance Manual
Caution should always be exercised
when using the laminator with
the safety shields raised.
You can be seriously HURT or INJURED!
b) Raise the safety shield to its full up right
position.
c) Pull the two locator latches of the pressure
plate toward the center of the laminator.
INFORMATION
The Explorer 107 pressure plate will not be
used in conjunction with the Digital Feeder.
d) Remove the pressure plate and set in a safe
place away from the laminator.
© GBC Pro - Tech February 2000
WARNING
Locator latches
e) Pull the two safety latches on the feed table
toward the center of the laminator.
Bottom view
of feed table
f) Lift the table from the front and pull out away
from the laminator. Set the table in a safe place.
INFORMATION
The Explorer 107 feed table will not be used
in conjunction with the Digital Feeder.
Installation
Safety latches
Page 4 - 11