GBC DIGITAL FEEDER Operation & Maintenance Manual page 42

Installation
c) Gently unwrap the shrink wrap from around the
feeder and conveyor.
Do not use an open blade to cut the shrink
wrap from the machine. You can cause
damge to the equipment!
d) Remove the shipping bolts from the feeder and
have the feeder lifted from the skid and placed
on the floor by licensed riggers.
The Digital Feeder is a large and heavy
piece of equipment. It is necessary to employ
LICENSED RIGGERS ONLY to move the
machine. The machine is not designed to be
tipped up or sideways in any way. Such
action disturbs the exact alignment of the
moving parts of the machine and requires
extensive realignment. You can be crushed
or seriously injured.
INFORMATION
GBC Pro-Tech's warranty does not cover
malfunction of the equipment due to
mishandling and / or tipping. GBC
Pro-Tech bears no responsibility for
personal injury or damage due to
moving the feeder improperly.
Page 4 - 8
CAUTION
WARNING
Digital Feeder Operation and Maintenance Manual
e) Inspect the machine for any obvious shipping
damages.
f) Move all packing materials to a safe distance
from the equipment and dispose of properly.
The shrink wrap is not recyclable, therefore
g) Use two people to carefully roll the feeder and
conveyor to the desired location.
Do not attempt to move the Digital Feeder
across anything other than a flat level
surface . You can be crushed
h) Continue with 4.6 Set up.
© GBC Pro - Tech February 2000
INFORMATION
it must be discarded.
WARNING
or seriously injured.