Preparatory Activities; Assembly Of The Parts Dismantled For Transport; Checking The Delivery Content; Selecting A Suitable Installation Location - HOLZMANN MASCHINEN HOB260ABS Operating Manual

To ensure proper transport, also observe the instructions and information on the transport
packaging regarding centre of gravity, attachment points, weight, means of transport to be used
and the prescribed transport position, etc.!
The machine is transported with the integrated castors, which can be folded up for the purpose of
changing location.
ASSEMBLY

15.1 Preparatory Activities

15.1.1 Checking the delivery content

Check the machine immediately after delivery for transport damage, missing parts and loose
screw connections. Report any damage or missing parts immediately to your dealer or freight
forwarder. Visible transport damage must be noted immediately on the delivery note in
accordance with the warranty provisions, otherwise the goods are deemed to have been properly
taken over.

15.1.2 Selecting a suitable installation location

 Choose a suitable place for the machine.
 Pay attention to the safety requirements and the dimensions of the machine.
 The selected location must ensure a suitable connection to the electrical supply as well as
the possibility of connection to an extraction system.
 Make sure that the floor can support the load of the machine.
 The machine must be levelled simultaneously at all support points.
 It is also necessary to guarantee a distance of at least 0.8 m around the machine.
 In front of and behind the machine, the necessary distance must be provided for the
feeding of long workpieces.

15.2 Assembly of the Parts Dismantled for Transport

The machine is pre-assembled. The parts that have been disassembled for transport must be
assembled before use. Follow the instructions below:
After assembly, fasten the planer thicknessing machine to the floor with screws.
HOLZMANN MASCHINEN GmbH
1.
www.holzmann-maschinen.at
NOTE
Assembly socket
 Mount the red socket elements (1) between the
grey elements.
 You need six screws and washers (2) for each
element.
ASSEMBLY
42
HOB 260ABS