Setting Preset Shots; Configuring Preposition Tours - Bosch VEZ-221-ECCE Installation Manual

AutoDome Easy II IP
14.2

Setting Preset Shots

Preset shots are saved camera positions. Shots are saved as
scenes, therefore, the terms SHOT and SCENE are used
interchangeably.
To set a Shot:
1.
2.
To view a Shot:

To store or clear a Shot:
1.
2.
14.3

Configuring Preposition Tours

A Preposition Tour automatically moves the camera through a
series of preset or saved shots.
The AutoDome Easy II has one (1) standard preset tour, two (2)
playback tours, and two (2) auto pan modes. Tour 1 is a
standard tour that moves the camera through a series of shots
in the sequence of shot number.
To start Preposition Tour:
1.
2.
To stop a Preposition Tour:

Bosch Security Systems, Inc.
Move the camera to the position you want to save.
Press SHOT-#-ENTER where # can be a number from 1 to
99 that identifies the camera position of the scene.
Press SHOT-#-ENTER where # is the number of the scene
position you want to view.
Press SET-100-ENTER to access the Store/Clear Scene
Menu.
Follow the on-screen instructions.
Set a series of preset shots in the order that you want the
AutoDome Easy II to cycle through.
Press ON-8-ENTER to start the tour. The tour then cycles
through the series of shots until it is stopped.
Press OFF-8-ENTER or move the joystick to stop either
type of tour.
Installation Manual
Common User Commands (unlocked) | en 119
F.01U.164.576 | 2.0 | 2010.03